8 Important Facts about Vapor Mitigation

Facts about Vapor Mitigation Vapor mitigation is a big issue in the construction of either residential or commercial buildings. Unfortunately, the comprehensive information about this issue is rarely known by the public. In fact, a better understanding of vapor intrusion and vapor mitigation system can lead to better safety to the occupants of the buildings. Below are 8 facts that must be understood by all building owners to increase the safety of their occupants.

#1. Definition of vapor intrusion

Vapor intrusion refers to a condition where contaminated soil and groundwater find their way to travel upwards through the cracks or holes in the foundation to the rooms and blur into one with the indoor air.

#2. The contaminating process

The contaminants get into the buildings through holes, cracks, or any openings in the foundation, which is likely to happen in the winter.

#3. The contaminants involved
There are a lot of contaminants that contribute to the intrusion but only a few of them are an issue. VOCs in petroleum products like fuel oil or gasoline are often found in the intrusion process. It is dangerous for health.

#4. Other methods of contamination
Besides the holes, cracks, or openings in the foundation, there are also other ways the unwanted substances get in the rooms. One of them is by the use of household products such as air fresheners, fuels, aerosol sprays, glues, etc.

#5. The bad effect
Vapor intrusion causes a variety of health problems especially respiratory problems. The amount of it influences how bad the effect could be. An immediate action of cleaning must be done with the help of vapor mitigation service.

#6. First action to take – take sampling
If you find your building contaminated with hazardous substances in the indoor air, you need a professional to take any required testing or sampling. The result will determine the next action to take.

#7. Find the source of the contamination
The professional must be sure of how the contaminants get in your building, from household products or from vapor intrusion, before deciding the best method of air cleaning.

#8. Further action to take – do the cleaning
If the source is found and vapor intrusion is what occurs, you can start seal any holes, cracks, or openings in the foundation, adjust the HVAC system, or install a sub-slab depressurization system.

The 8 facts conclude all information you must know to prevent the biggest effect of vapor intrusion to the occupants of your home. Call a professional in vapor mitigation to help you!

Related posts:

  1. 8 Things You Should Know about Vapor Intrusion
  2. 8 Important Health Facts on Radon System We Should Know
  3. Learn from Vapor Intrusion Guidance
  4. 8 Fundamental Points of Living a Healthy Family with Duct Cleaning Phoenix
  5. 5 Steps How to File a Lien
Both comments and pings are currently closed.

Comments are closed.